Ge Profile Washer Agitator Not Working. Once i select the setting and press start, i just get a humming sound that appears to be coming from the motor but dissipates after five minutes or so. There should be continuity from terminal 7.
The drive block connects the washer transmission to the agitator. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. As it is splined, you should experience some resistance.
Click To See Full Answer.
The ge profile ptw705bstws is part of the washing machines test program at consumer reports. Simply use the opportunity of lubricant in this shaft to help to keep the agitator’s motion smooth. The drive block connects the washer transmission to the agitator.
If The Washer Is Not Agitating, You May Need To Reset Your Washer Motor.
There should be continuity from terminal 7. Attempt to manually turn the agitator. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity.
Washer Does Fill When Cycle Is Started.spin Switch Connecting Hose To Washer Is Free Of Debris.
With no water in the tub: Disconnect your washing machine from the power source. Remove the upper washer lid.
As It Is Splined, You Should Experience Some Resistance.
I can hear the motor running, but it seems that the agitator is not catching the part that makes it agitate, so while reading these forums and some others it seems to be determined that the coupling air bell has worn since it is plastic and can no longer catch on the agitator (if you think this is wrong please. Without warning the agitator no longer works and feels loose and wiggley on the shaft. First pump the water out by turning the timer to spin.
Remove The Agitator From The Appliance To Inspect It More Closely.
Ge washer does not agitate or spin: Once the water is out, turn the washer off. Drain pump doesn’t pump enough water:
Tidak ada komentar:
Posting Komentar